RightWay Ag Solutions

ImPhos is a liquid additive specifically formulated to impregnate dry Phosphorus (MAP, DAP, …) in order to prevent its tie-up with Ca²+ (calcareous soils), Fe²+ and Al³+ (acidic soils). It has been formulated in a highly concentrated form to be applied at low volume on dry fertilizer, enhancing drying time and reducing chances for caking. Once applied to the soil, the impregnated Phosphorus is protected in a readily available form for a period of 100-150 days, depending on the moisture and temperature conditions.

ImPhos is recommended at a rate of 0.5-1.0 L per acre with the starter fertilizer and 3.0L/ metric ton of dry fertilizer.

MicroCharger^™ is a supplementary source of micronutrients including Zinc, Manganese, Copper and Iron.

For use at seeding or throughout the growing season.

More effective nutrient uptake compared to plants treated with a single element leading to less micronutrient deficiencies.

Helps preserve yield and prevent deficiencies.

Contribute in keeping the crop healthy.

A– Zinc deficiency in corn
B– Copper deficiency in wheat
C– Manganese deficiency in wheat
D– Iron chlorosis in Soy
E– Manganese deficiency in Chickpeas
F– Manganese deficient in canola
G– Copper deficiency in wheat

Highly concentrated liquid suspension intended for coating dry PKS blends with micronutrients.

It can also be applied on other porous materials placed in the seed row (i.e., gypsum).

Formulated with Micronutrient Delivery System (MDS Technology™).

Various analyses offered.

Perfuze is easy to use.

Faster drying time.

Treatment possible at low temperatures (-25°C).

Perfuze is recommended for use in rotatory vertical or horizontal drum blenders, screw auger or conveyor blenders, rubon blender or other volumetric blending systems.

Most cost-effective and efficient way of applying micronutrients to the soil.

The product is available in 5L jugs, 450L and 1000L Totes.

Even coverage of the fertilizer granules.

As a liquid product, Perfuze helps reduce dust during blending.

Better access of the roots to essential micronutrients.

Correction of the expected micronutrients deficiencies.

Healthier crops with a preserved yield and quality.

• Copper EDTA 7.5%

• Zinc EDTA 9%

• Manganese EDTA 5%

• Iron EDTA 5%

• Moly

OMEX EDTAs (Zn, Cu, Mn, Fe) are recommended for the prevention and correction of deficiencies in crops. OMEX Moly is a water soluble solution with a guaranteed analysis of 1.5% or 3% Molybdenum. It is recommended for the prevention and correction of Molybdenum deficiency in crops, to encourage nodulation in pulses, especially in acidic soils (low pH). The preferred use is as a soil application to prevent deficiency. When soil application is not possible, OMEX Single Elements may be applied in-crop alone or with pesticides or other fertilizers, directly to the foliage to correct deficiency. OMEX Single Elements may be applied via ground sprayers (high-volume), aircraft or fertigation systems.

Starter fertilizer for in-furrow.

High Phosphorus content.

Formulated with 70% Ortho- (readily available form) and 30% Poly-phosphate (converts slowly as soil warms up).

Low salt index.

No chloride.

Seed safe.

The product is available in bulk, 450L and 1000L IBC’s.

Improved root and shoot development and crop establishment.

Strong advantage of the crop over the weeds.

Enhanced tolerance to early season environmental stress.

Less signs of phosphorus deficiency on the seedlings (purpling).

TPA stands for Thermo Poly Aspartate

Highly polymerized and negatively charged beta protein.

Biodegradable and lasts 120 days in the soil.

The product is available in 10L jugs, 450L and 1000L IBC’s. Also available with PGR’s.

Improved root development and growth.

Better nutrient availability and uptake visible in tissue tests.

Increased tuber count in potatoes with an even size.

Improved marketable yield in potatoes.

CalMax Complete is recommended on all crops, especially fruits and vegetables.

Calcium is taken up in the plants by mass flow but is immobile in the plant. A constant supply is recommended to avoid shortages and deficiencies.

A typical application should cover these three phases of growth and development (i.e., for potatoes: CalMax Complete is recommended at tuber initiation, then 2-3 times after that within 10-14 day intervals each.

Calcium is important for roots and shoots structure early on in the season; during flowering and guidance of pollen tubes; and during fruits maturation and bulking.

Application rate: 1.0 L CalMax and 0.6 L Complete per acre in a minimum of 10 US gal of water.

Compatible with most commonly used pesticides (see compatibility charts).

Order of addition to sprayer is (1)water, (2)CalMax Complete and (3)pesticide.

Lucky 13 can be used as a maintenance foliar spray to supplement soil-applied fertility.

Use to rescue crops suffering from stress conditions i.e., cool/wet sandy soils, saturated heavy soils, shallow roots or at later stages in the season.

Lucky 13 delivers the same nutrient content as water soluble fertilizer products i.e., 18-20-20, 20-20-20.

2 liters of Lucky 13 equals 5 lbs of 18-20-20 without the hassle of dissolving solids into water.

Lucky 13 is user- and equipment-friendly and easy to handle.

Apply Lucky 13 at 2 L/ac in a spraying volume of 5-10 US gal of water.

Can be combined with other fertilizer mixes and pesticides (see compatibility charts).

Lucky 13 is suitable for all major field and horticultural crops and vegetables. These include cereals (wheat, barley, oats, corn), oilseeds (canola, mustard, flax), pulses (peas, chickpea, lentils, beans), tuber and root crops.

Use on crop challenged for nitrogen uptake under poor conditions i.e., wet sandy soils, saturated heavy soils, shallow roots or at later stages in the season.

Muscle Up increases the greenness of the crop, which translates into an optimal photosynthesis and assimilation of nutrients.

Muscle Up promotes yield and quality.

Apply Muscle Up at 2 L/ac in a spraying volume of 5-10 US gal of water.

Can be combined with other fertilizer mixes and pesticides (see compatibility charts).

Additional chelated micronutrients can be included as required.

Muscle Up is suitable for all major field and horticultural crops and vegetables. These include cereals (wheat, barley, oats, corn), oilseeds (canola, mustard, flax), pulses (peas, chickpea, lentils, beans), tuber and root crops.

Use with the herbicide at 3-5 leaf stage.

Nutri-Boost boosts the metabolism, provides energy (high phosphorus analysis) and relieves the crop from early-season stress (cold, wet, physical or chemical injury, …).

Use after hail storm with Super B (10% Boron) to mitigate tissue damage and restimulate growth and branching.

Use to advance crop maturity.

Cereals and Canola: 2 L/ac with 5-10 US gal/ac of water.

Can be used alone or in combination with pesticides (see compatibility charts).

Recommended for all crops at the 3-5 leaf stage.

Past this stage, check with your local OMEX rep for other available products.

Tank-mix with 0.5 L/ac of Super B on hail-damaged crops.

Add Nutri-Boost Fertilizer to the water before adding the pesticide when tank mixing. Add Nutri-Boost Fertilizer last when tank mixing with Liberty or Infinity.

Recommended on a variety of field, horticultural and vegetable crops.

Use to mitigate or correct Boron deficiency and supplement soil-applied boron.

Boron is critical for cell division, cell wall structure, and sugar transport.

Increasing Boron levels in the plant, makes plants less attractive to insects and complements the effect of insecticides.

Application of Boron accelerates the translocation of carbohydrates in the plant and helps with grain fill.

Boron is highly recommended after hail because it is involved in the wound-healing process.

It is essential for the formation of viable pollen and therefore seed fertilization and development.

Boron can be deficient during hot and dry conditions.

Flower abortion (heat blast) and blanks in canola pods are visible signs of Boron deficiency.

Boron is immobile in plants, but vital at critical times. It is required in small doses, in the right quantities, at the right time and is crucial at flowering time, to reduce Point of Deliquescence.

0.5-1.0 L/ac with a minimum of 5-10 US gal/ water.

Multiple applications are recommended especially under severe deficiencies.

Do not apply more than 1.5 L/ac in one single spray. If the crop requires more than this rate, split into multiple applications allowing two weeks between sprays.

Can be combined with pesticides (see compatibility charts).

¹Point of Deliquescence = the relative humidity limit below which water evaporates and the fertilizer salts out.

SuperMn+ promotes rapid uptake during acute periods of Manganese shortage.

It is recommended during herbicide timing and under conditions that reduce Manganese uptake.

Recommended for areas with soil pH > 6.5, where Manganese availability is limited.

Use when a poor root system is observed to trigger secondary root formation.

Highly recommended when dealing with leaf and root diseases.

SuperMn+ is effective on soybeans and other pulses, oilseeds, cereals, fruits and vegetables with high Manganese requirements.

Formulated to readily mix with glyphosate products.

1-2 L/ac in 5-10 US gal of spray water volume.

Mix the highly concentrated suspension thoroughly before transfer into the spray tank (if a jug, shake well. If a shuttle, circulate or push air through).

Fill the spray tank at least 2/3 full prior to adding SuperMn+.

Maintain proper agitation while mixing.

Use to supplement a well-balanced soil-applied fertility when the soil is unable to transfer nutrients (waterlogging, drought, heat, high humidity).

Use to mitigate or correct crop deficiency and based on tissue test.

Phosphorus uptake through the leaves is far greater than through the roots.

Uptake and utilization of Phosphorus is improved when balanced with Potassium and Nitrogen.

2-4 L/ac in a spray volume of 5-10 US gal/ac.

Use alone or in combination with pesticides for cereals (3-5 leaf stage, flag, heading), canola (rosette, early bloom at fungicide timing, after poding), flax and legumes (early bloom with the fungicide).

For potatoes, perform 3 applications (10-14 day intervals), beginning at tuber initiation.